2020
|
Natali Caterina; Battarra Mattia; Giorgio Dalpiaz; Emiliano Mucchi A comparison between gear mesh stiffness calculation methods and their sensitivity for lightweight gears (Journal paper) Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics, pp. 1403 - 1418, 2020, ISBN: 978-908289311-3. (Abstract | BibTeX | Tag: Battarra M., Dalpiaz G., Mucchi E., Natali C.) @article{Natali2020,
title = {A comparison between gear mesh stiffness calculation methods and their sensitivity for lightweight gears},
author = {Natali Caterina; Battarra Mattia; Giorgio Dalpiaz; Emiliano Mucchi},
editor = {KU Leuven - Departement Werktuigkunde },
isbn = {978-908289311-3},
year = {2020},
date = {2020-09-09},
journal = {Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics},
pages = {1403 - 1418},
abstract = {The present work deals with the analysis of the criticalities connected to the calculation of the mesh stiffness for spur gears. In particular, the proposed dissertation compares the most famous methods for the mesh stiffness calculation, found in the literature, focusing the attention on their accuracy for the lightweight gear case. Specifically, five methods have been investigated, one based on an analytical approach, two based on finite element (FE) methods and two hybrid analytical-FE methods. Moreover, an hybrid linear FE-non-linear FE method has been proposed. The sensitivity of the illustrated methods on the mesh stiffness in the analysis case of lightweight gears is investigated and presented. Pros and cons about the analysed approaches have been assessed, in terms of accuracy of the results and computational time. Furthermore, the paper presents different focuses on untreated topics found in the references.},
keywords = {Battarra M., Dalpiaz G., Mucchi E., Natali C.},
pubstate = {published},
tppubtype = {article}
}
The present work deals with the analysis of the criticalities connected to the calculation of the mesh stiffness for spur gears. In particular, the proposed dissertation compares the most famous methods for the mesh stiffness calculation, found in the literature, focusing the attention on their accuracy for the lightweight gear case. Specifically, five methods have been investigated, one based on an analytical approach, two based on finite element (FE) methods and two hybrid analytical-FE methods. Moreover, an hybrid linear FE-non-linear FE method has been proposed. The sensitivity of the illustrated methods on the mesh stiffness in the analysis case of lightweight gears is investigated and presented. Pros and cons about the analysed approaches have been assessed, in terms of accuracy of the results and computational time. Furthermore, the paper presents different focuses on untreated topics found in the references. |
D'Elia Gianluca; Cocconcelli Marco; Strozzi Matteo; Mucchi Emiliano; Dalpiaz Giorgio; Rubini Riccardo Motor current cyclic-non-stationarity analysis for bearing diagnostic (Conference) Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics, 2020, ISBN: 978-908289311-3. (Abstract | BibTeX | Tag: Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E., Rubini R., Strozzi M.) @conference{D'Elia2020,
title = {Motor current cyclic-non-stationarity analysis for bearing diagnostic},
author = {D'Elia Gianluca; Cocconcelli Marco; Strozzi Matteo; Mucchi Emiliano; Dalpiaz Giorgio; Rubini Riccardo},
editor = {KU Leuven - Departement Werktuigkunde},
isbn = {978-908289311-3},
year = {2020},
date = {2020-09-07},
booktitle = {Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics},
pages = {597 - 607},
abstract = {The Motor Current Signature Analysis (MCSA) is a research area focused on the diagnosis of components of electric motors based on post-processing of the current signal mainly. In particular, the bearing diagnostics is based on two different assumptions: the fault on the bearing causes a vibration of the shaft it supports, so there is an air gap variation between stator and rotor causing a modulation in the current signal; the fault on the bearing hinders the rotation of the shaft, so it can be modeled as an additional loading torque that the motor satisfies increasing the current signal. In this paper, a cyclic-non-stationarity analysis of the motor current is used to assess the status of ball-bearings in servomotors, running at variable speed. Both speed of the motor and motor current are provided by the control loop of the servomotor, that is no external sensors are used. The cyclic nature of the application allows an average of the cyclic-cyclic order maps to increase the signal-to-noise ratio. The proposed technique is successfully applied to both healthy and faulty bearings. },
keywords = {Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E., Rubini R., Strozzi M.},
pubstate = {published},
tppubtype = {conference}
}
The Motor Current Signature Analysis (MCSA) is a research area focused on the diagnosis of components of electric motors based on post-processing of the current signal mainly. In particular, the bearing diagnostics is based on two different assumptions: the fault on the bearing causes a vibration of the shaft it supports, so there is an air gap variation between stator and rotor causing a modulation in the current signal; the fault on the bearing hinders the rotation of the shaft, so it can be modeled as an additional loading torque that the motor satisfies increasing the current signal. In this paper, a cyclic-non-stationarity analysis of the motor current is used to assess the status of ball-bearings in servomotors, running at variable speed. Both speed of the motor and motor current are provided by the control loop of the servomotor, that is no external sensors are used. The cyclic nature of the application allows an average of the cyclic-cyclic order maps to increase the signal-to-noise ratio. The proposed technique is successfully applied to both healthy and faulty bearings. |
2019
|
Hamadache Moussa; D'Elia Gianluca; Dalpiaz Giorgio On the nyquist frequency of random sampled signals (Book Chapter) 15 , Applied Condition Monitoring, 2019. (Links | BibTeX | Tag: D'Elia G., Dalpiaz G., Hamadache M.) @inbook{G2019,
title = {On the nyquist frequency of random sampled signals},
author = {Hamadache Moussa; D'Elia Gianluca; Dalpiaz Giorgio},
doi = {10.1007/978-3-030-11220-2_32},
year = {2019},
date = {2019-04-12},
volume = {15},
publisher = {Applied Condition Monitoring},
keywords = {D'Elia G., Dalpiaz G., Hamadache M.},
pubstate = {published},
tppubtype = {inbook}
}
|
Buzzoni Marco; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio A vibration-based method for contact pattern assessment in straight bevel gears (Journal paper) Mechanical Systems and Signal Processing, 2019. (Links | BibTeX | Tag: Buzzoni M., D'Elia G., Dalpiaz G., Mucchi E.) @article{Buzzoni2019,
title = {A vibration-based method for contact pattern assessment in straight bevel gears},
author = {Buzzoni Marco; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio},
url = {https://www.sciencedirect.com/science/article/pii/S0888327018306630?via%3Dihub},
doi = {10.1016/j.ymssp.2018.10.002},
year = {2019},
date = {2019-04-01},
journal = {Mechanical Systems and Signal Processing},
keywords = {Buzzoni M., D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
2018
|
Buzzoni Marco; Soave Elia; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio Development of an Indicator for the Assessment of Damage Level in Rolling Element Bearings Based on Blind Deconvolution Methods (Journal paper) Shock and Vibration, 2018. (Links | BibTeX | Tag: Buzzoni M., D'Elia G., Dalpiaz G., Mucchi E., Soave E.) @article{G2018b,
title = {Development of an Indicator for the Assessment of Damage Level in Rolling Element Bearings Based on Blind Deconvolution Methods},
author = {Buzzoni Marco; Soave Elia; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio},
doi = {10.1155/2018/5384358},
year = {2018},
date = {2018-10-10},
journal = {Shock and Vibration},
keywords = {Buzzoni M., D'Elia G., Dalpiaz G., Mucchi E., Soave E.},
pubstate = {published},
tppubtype = {article}
}
|
Hamadache Moussa; Lee Dongik; Mucchi Emiliano; Dalpiaz Giorgio Vibration-based bearing fault detection and diagnosis via image recognition technique under constant and variable speed conditions (Journal paper) Applied Sciences (Switzerland), 2018. (Links | BibTeX | Tag: Dalpiaz G., Hamadache M., Lee D., Mucchi E.) @article{G2018,
title = {Vibration-based bearing fault detection and diagnosis via image recognition technique under constant and variable speed conditions},
author = {Hamadache Moussa; Lee Dongik; Mucchi Emiliano; Dalpiaz Giorgio},
doi = {10.3390/app8081392},
year = {2018},
date = {2018-08-17},
journal = {Applied Sciences (Switzerland)},
keywords = {Dalpiaz G., Hamadache M., Lee D., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
2017
|
Buzzoni Marco; Battarra Mattia; Mucchi Emiliano; Dalpiaz Giorgio
Motion analysis of a linear vibratory feeder: Dynamic modeling and experimental verification (Journal paper) Mechanism and Machine Theory, 2017. (Links | BibTeX | Tag: Battarra M., Buzzoni M., Dalpiaz G., Mucchi E.) @article{Giorgio2017,
title = {Motion analysis of a linear vibratory feeder: Dynamic modeling and experimental verification},
author = {Buzzoni Marco; Battarra Mattia; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {https://www.sciencedirect.com/science/article/pii/S0094114X17300952
},
doi = {10.1016/j.mechmachtheory.2017.04.006},
year = {2017},
date = {2017-09-15},
journal = {Mechanism and Machine Theory},
keywords = {Battarra M., Buzzoni M., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
D'Elia Gianluca; Cocconcelli Marco; Mucchi Emiliano; Dalpiaz Giorgio
Combining blind separation and cyclostationary techniques for monitoring distributed wear in gearbox rolling bearings (Journal paper) Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science, 2017. (Links | BibTeX | Tag: Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E.) @article{D'Elia2017b,
title = {Combining blind separation and cyclostationary techniques for monitoring distributed wear in gearbox rolling bearings},
author = {D'Elia Gianluca; Cocconcelli Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://journals.sagepub.com/doi/abs/10.1177/0954406216636165
},
doi = {10.1177/0954406216636165},
year = {2017},
date = {2017-09-14},
journal = {Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science},
keywords = {Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Berlato Francesco; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio
Metriche Vibrazionali per il Monitoraggio dell’Usura Distribuita in Riduttori Epicicloidali (Conference) Decima giornata di studio Ettore Funaioli
, 2017. (Links | BibTeX | Tag: Berlato F., D'Elia G., Dalpiaz G., Mucchi E.) @conference{Berlato2017,
title = {Metriche Vibrazionali per il Monitoraggio dell’Usura Distribuita in Riduttori Epicicloidali},
author = {Berlato Francesco; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/5600/
},
year = {2017},
date = {2017-09-13},
booktitle = {Decima giornata di studio Ettore Funaioli
},
keywords = {Berlato F., D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
A CWT-based methodology for piston slap experimental characterization (Journal paper) Mechanical Systems and Signal Processing, 2017. (Links | BibTeX | Tag: Buzzoni M., Dalpiaz G., Mucchi E.) @article{Buzzoni2017,
title = {A CWT-based methodology for piston slap experimental characterization},
author = {Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {https://www.sciencedirect.com/science/article/pii/S0888327016303934},
doi = {10.1016/j.ymssp.2016.10.005},
year = {2017},
date = {2017-09-07},
journal = {Mechanical Systems and Signal Processing},
keywords = {Buzzoni M., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Cocconcelli Marco; Troncossi Marco; Mucchi Emiliano; Agazzi Alessandro; Rivola Alessandro; Rubini Riccardo; Dalpiaz Giorgio
Numerical and Experimental Dynamic Analysis of IC Engine Test Beds Equipped with Highly Flexible Couplings (Journal paper) Shock and Vibration, 2017. (Links | BibTeX | Tag: Agazzi A., Cocconcelli M., Dalpiaz G., Mucchi E., Rivola A., Rubini R., Troncossi M.) @article{Cocconcelli2017,
title = {Numerical and Experimental Dynamic Analysis of IC Engine Test Beds Equipped with Highly Flexible Couplings},
author = {Cocconcelli Marco; Troncossi Marco; Mucchi Emiliano; Agazzi Alessandro; Rivola Alessandro; Rubini Riccardo; Dalpiaz Giorgio
},
url = {https://www.hindawi.com/journals/sv/2017/5802702/
},
doi = {10.1155/2017/5802702},
year = {2017},
date = {2017-09-07},
journal = {Shock and Vibration},
keywords = {Agazzi A., Cocconcelli M., Dalpiaz G., Mucchi E., Rivola A., Rubini R., Troncossi M.},
pubstate = {published},
tppubtype = {article}
}
|
Buzzoni Marco; Mucchi Emiliano; D'Elia Gianluca; Dalpiaz Giorgio
Diagnosis of Localized Faults in Multistage Gearboxes: A Vibrational Approach by Means of Automatic EMD-Based Algorithm (Journal paper) Shock and Vibration, 2017. (Links | BibTeX | Tag: Buzzoni M., D'Elia G., Dalpiaz G., Mucchi E.) @article{Buzzoni2017b,
title = {Diagnosis of Localized Faults in Multistage Gearboxes: A Vibrational Approach by Means of Automatic EMD-Based Algorithm},
author = {Buzzoni Marco; Mucchi Emiliano; D'Elia Gianluca; Dalpiaz Giorgio
},
url = {https://www.hindawi.com/journals/sv/2017/8345704/
},
doi = {10.1155/2017/8345704},
year = {2017},
date = {2017-09-06},
journal = {Shock and Vibration},
keywords = {Buzzoni M., D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Buzzoni Marco; Battarra Mattia; Mucchi Emiliano; Dalpiaz Giorgio
Noise and vibration improvements in vibratory feeders by analytical models and experimental analysis (Conference) Internoise, Proceedings of the INTER-NOISE 2017- 46th International Congress and Exposition on Noise Control Engineering
, 2017. (BibTeX | Tag: Battarra M., Buzzoni M., Dalpiaz G., Mucchi E.) @conference{Buzzoni2017c,
title = {Noise and vibration improvements in vibratory feeders by analytical models and experimental analysis},
author = {Buzzoni Marco; Battarra Mattia; Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2017},
date = {2017-09-06},
booktitle = {Internoise, Proceedings of the INTER-NOISE 2017- 46th International Congress and Exposition on Noise Control Engineering
},
keywords = {Battarra M., Buzzoni M., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2016
|
Castellani Francesco; D'Elia Gianluca, Astolfi Davide; Mucchi Emiliano; Dalpiaz Giorgio; Terzi Ludovico Analyzing wind turbine flow interaction through vibration data (Conference) Institute of Physics Publishing, Journal of Physics: Conference Series
, 2016. (BibTeX | Tag: Astolfi D., Castellani F., D'Elia G., Dalpiaz G., Mucchi E., Terzi L.) @conference{Castellani2016,
title = {Analyzing wind turbine flow interaction through vibration data},
author = {Castellani Francesco; D'Elia Gianluca, Astolfi Davide; Mucchi Emiliano; Dalpiaz Giorgio; Terzi Ludovico},
year = {2016},
date = {2016-09-25},
booktitle = {Institute of Physics Publishing, Journal of Physics: Conference Series
},
keywords = {Astolfi D., Castellani F., D'Elia G., Dalpiaz G., Mucchi E., Terzi L.},
pubstate = {published},
tppubtype = {conference}
}
|
Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
Improvement of the vibro-acoustic behaviour of vibratory feeders for pasta by modelling and experimental techniques (Conference) Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering
, 2016. (Links | BibTeX | Tag: Buzzoni M., Dalpiaz G., Mucchi E.) @conference{Buzzoni2016b,
title = {Improvement of the vibro-acoustic behaviour of vibratory feeders for pasta by modelling and experimental techniques},
author = {Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://pub.dega-akustik.de/IN2016/data/index.html
},
year = {2016},
date = {2016-09-15},
booktitle = {Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering
},
keywords = {Buzzoni M., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
D’Elia Gianluca; Cocconcelli Marco; Mucchi Emiliano; Rubini Riccardo; Dalpiaz Giorgio
Step-by-step algorithm for the simulation of faulted bearings in non-stationary conditions (Conference) Proceedings of ISMA2016 International Conference on Noise and Vibration Engineering
, 2016. (Links | BibTeX | Tag: Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E., Rubini R.) @conference{D’Elia2016,
title = {Step-by-step algorithm for the simulation of faulted bearings in non-stationary conditions},
author = {D’Elia Gianluca; Cocconcelli Marco; Mucchi Emiliano; Rubini Riccardo; Dalpiaz Giorgio
},
url = {http://past.isma-isaac.be/isma2016/
},
year = {2016},
date = {2016-09-15},
booktitle = {Proceedings of ISMA2016 International Conference on Noise and Vibration Engineering
},
keywords = {Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E., Rubini R.},
pubstate = {published},
tppubtype = {conference}
}
|
Malago׳ Marco; Mucchi Emiliano; Dalpiaz Giorgio
Fault detection in heavy duty wheels by advanced vibration processing techniques and lumped parameter modeling (Journal paper) Mechanical Systems and Signal Processing, 2016. (Links | BibTeX | Tag: Dalpiaz G., Malago׳ M., Mucchi E.) @article{Malago׳2016,
title = {Fault detection in heavy duty wheels by advanced vibration processing techniques and lumped parameter modeling},
author = {Malago׳ Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {https://www.sciencedirect.com/science/article/pii/S0888327015004562
},
doi = {10.1016/j.ymssp.2015.09.043},
year = {2016},
date = {2016-09-14},
journal = {Mechanical Systems and Signal Processing},
keywords = {Dalpiaz G., Malago׳ M., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
Piston slap noise reduction in IC engines: design improvements by advanced signal processing techniques (Conference) Proceedings of ISMA2016 International Conference on Noise and Vibration Engineering
, 2016. (Links | BibTeX | Tag: Buzzoni M., Dalpiaz G., Mucchi E.) @conference{Buzzoni2016,
title = {Piston slap noise reduction in IC engines: design improvements by advanced signal processing techniques},
author = {Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://past.isma-isaac.be/isma2016/
},
year = {2016},
date = {2016-09-09},
booktitle = {Proceedings of ISMA2016 International Conference on Noise and Vibration Engineering
},
keywords = {Buzzoni M., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2015
|
Battarra Mattia; Mucchi Emiliano; Dalpiaz Giorgio
A Model for the Estimation of Pressure Ripple in Tandem Gear Pumps (Conference) Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering
, 2015. (BibTeX | Tag: Battarra M., Dalpiaz G., Mucchi E.) @conference{Battarra2015,
title = {A Model for the Estimation of Pressure Ripple in Tandem Gear Pumps},
author = {Battarra Mattia; Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2015},
date = {2015-09-16},
booktitle = {Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering
},
keywords = {Battarra M., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
D’Elia Gianluca; Cocconcelli Marco; Mucchi Emiliano; Dalpiaz Giorgio
On the diagnostics of planet gear bearings (Conference) 9th IFToMM International Conference on Rotor Dynamics
, 2015. (Links | BibTeX | Tag: Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E.) @conference{D’Elia2015,
title = {On the diagnostics of planet gear bearings},
author = {D’Elia Gianluca; Cocconcelli Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {https://www.springer.com/it/book/9783319065892
},
year = {2015},
date = {2015-09-11},
booktitle = {9th IFToMM International Conference on Rotor Dynamics
},
keywords = {Cocconcelli M., D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Tosi Gabriele; Mucchi Emiliano; D’Ippolito Roberto; Dalpiaz Giorgio
Dynamic behavior of pumps: an efficient approach for fast robust design optimization (Journal paper) Meccanica, 2015. (Links | BibTeX | Tag: D’Ippolito R., Dalpiaz G., Mucchi E., Tosi G.) @article{Tosi2015,
title = {Dynamic behavior of pumps: an efficient approach for fast robust design optimization},
author = {Tosi Gabriele; Mucchi Emiliano; D’Ippolito Roberto; Dalpiaz Giorgio
},
url = {https://link.springer.com/article/10.1007/s11012-015-0142-z
},
doi = {10.1007/s11012-015-0142-z},
year = {2015},
date = {2015-09-10},
journal = {Meccanica},
keywords = {D’Ippolito R., Dalpiaz G., Mucchi E., Tosi G.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso
Elasto-dynamic analysis of a gear pump–Part IV: Improvement in the pressure distribution modelling (Journal paper) Mechanical Systems and Signal Processing, 2015. (Links | BibTeX | Tag: Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.) @article{Mucchi2015b,
title = {Elasto-dynamic analysis of a gear pump–Part IV: Improvement in the pressure distribution modelling},
author = {Mucchi Emiliano; Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso
},
url = {https://www.sciencedirect.com/science/article/pii/S0888327014002325
},
doi = {10.1016/j.ymssp.2014.05.049},
year = {2015},
date = {2015-09-10},
journal = {Mechanical Systems and Signal Processing},
keywords = {Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Dalpiaz Giorgio
On the Comparison Between Displacement Modal Testing and Strain Modal Testing (Conference) Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering
, 2015. (BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Mucchi2015d,
title = {On the Comparison Between Displacement Modal Testing and Strain Modal Testing},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2015},
date = {2015-09-10},
booktitle = {Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Boschi Giacomo; Mucchi Emiliano; Dalpiaz Giorgio; Luckzak Marcin M.
On The Use of Experimental Modal Analysis for Damage Detection of a Tripod Supporting Structure for an Offshore Wind Turbine (Conference) Nona giornata di studio Ettore Funaioli
, 2015. (Links | BibTeX | Tag: Boschi G., Dalpiaz G., Luczak M., Mucchi E.) @conference{Mucchi2015c,
title = {On The Use of Experimental Modal Analysis for Damage Detection of a Tripod Supporting Structure for an Offshore Wind Turbine},
author = {Boschi Giacomo; Mucchi Emiliano; Dalpiaz Giorgio; Luckzak Marcin M.
},
url = {http://amsacta.unibo.it/5237/
},
year = {2015},
date = {2015-09-10},
booktitle = {Nona giornata di studio Ettore Funaioli
},
keywords = {Boschi G., Dalpiaz G., Luczak M., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2014
|
Cocconcelli Marco; Agazzi Alessandro; Mucchi Emiliano; Dalpiaz Giorgio; Rubini Riccardo
Dynamic analysis of coupling elements in IC engine test rigs (Conference) Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics
, 2014. (BibTeX | Tag: Agazzi A., Cocconcelli M., Dalpiaz G., Mucchi E., Rubini R.) @conference{Cocconcelli2014b,
title = {Dynamic analysis of coupling elements in IC engine test rigs},
author = {Cocconcelli Marco; Agazzi Alessandro; Mucchi Emiliano; Dalpiaz Giorgio; Rubini Riccardo
},
year = {2014},
date = {2014-09-18},
booktitle = {Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics
},
keywords = {Agazzi A., Cocconcelli M., Dalpiaz G., Mucchi E., Rubini R.},
pubstate = {published},
tppubtype = {conference}
}
|
Tosini Andrea; Mucchi Emiliano; Dalpiaz Giorgio
Analisi vibrazionale numerica e sperimentale di un trabatto per pasta alimentare (Conference) Ottava giornata di studio Ettore Funaioli
, 2014. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E., Tosini A.) @conference{Tosini2014,
title = {Analisi vibrazionale numerica e sperimentale di un trabatto per pasta alimentare},
author = {Tosini Andrea; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/4301/
},
year = {2014},
date = {2014-09-17},
booktitle = {Ottava giornata di studio Ettore Funaioli
},
keywords = {Dalpiaz G., Mucchi E., Tosini A.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Zambardi Roberto; Dalpiaz Giorgio
Numerical Vibro-Acoustic Analysis of Gear Pumps for Automotive Applications (Conference) Controllo delle emissioni vibro-acustiche dei prodotti industriali
, 2014. (BibTeX | Tag: Dalpiaz G., Mucchi E., Zambardi R.) @conference{Mucchi2014b,
title = {Numerical Vibro-Acoustic Analysis of Gear Pumps for Automotive Applications},
author = {Mucchi Emiliano; Zambardi Roberto; Dalpiaz Giorgio
},
year = {2014},
date = {2014-09-17},
booktitle = {Controllo delle emissioni vibro-acustiche dei prodotti industriali
},
keywords = {Dalpiaz G., Mucchi E., Zambardi R.},
pubstate = {published},
tppubtype = {conference}
}
|
Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
Analisi dinamica numerico-sperimentale di una motosega (Conference) Ottava giornata di studio Ettore Funaioli
, 2014. (Links | BibTeX | Tag: Buzzoni M., Dalpiaz G., Mucchi E.) @conference{Buzzoni2014,
title = {Analisi dinamica numerico-sperimentale di una motosega},
author = {Buzzoni Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/4301/
},
year = {2014},
date = {2014-09-11},
booktitle = {Ottava giornata di studio Ettore Funaioli
},
keywords = {Buzzoni M., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; D’Elia Gianluca; Dalpiaz Giorgio
Use of cyclostationary analysis for rust detection on the hub of heavy duty wheels (Conference) The 4th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN0 2014)
, 2014. (BibTeX | Tag: D'Elia G., Dalpiaz G., Mucchi E.) @conference{Mucchi2014d,
title = {Use of cyclostationary analysis for rust detection on the hub of heavy duty wheels},
author = {Mucchi Emiliano; D’Elia Gianluca; Dalpiaz Giorgio
},
year = {2014},
date = {2014-09-11},
booktitle = {The 4th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN0 2014)
},
keywords = {D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Malagó Marco; Mucchi Emiliano; Dalpiaz Giorgio
Effectiveness of Advanced Vibration Processing Techniques for Fault Detection in Heavy Duty Wheels (Conference) Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013
, 2014. (Links | BibTeX | Tag: Dalpiaz G., Malago׳ M., Mucchi E.) @conference{Malagó2014,
title = {Effectiveness of Advanced Vibration Processing Techniques for Fault Detection in Heavy Duty Wheels},
author = {Malagó Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {https://www.springer.com/la/book/9783642393471
},
year = {2014},
date = {2014-09-10},
booktitle = {Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013
},
keywords = {Dalpiaz G., Malago׳ M., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Cocconcelli Marco; Troncossi Marco; Agazzi Alessandro; Mucchi Emiliano; Rubini Riccardo; Rivola Alessandro; Dalpiaz Giorgio
Improvement of the Dynamic Behaviour of a Test Bed Driveline by Numerical and Experimental Investigations (Conference) Ottava giornata di studio Ettore Funaioli
, 2014. (Links | BibTeX | Tag: Agazzi A., Cocconcelli M., Dalpiaz G., Mucchi E., Rivola A., Rubini R., Troncossi M.) @conference{Cocconcelli2014,
title = {Improvement of the Dynamic Behaviour of a Test Bed Driveline by Numerical and Experimental Investigations},
author = {Cocconcelli Marco; Troncossi Marco; Agazzi Alessandro; Mucchi Emiliano; Rubini Riccardo; Rivola Alessandro; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/4301/
},
year = {2014},
date = {2014-09-10},
booktitle = {Ottava giornata di studio Ettore Funaioli
},
keywords = {Agazzi A., Cocconcelli M., Dalpiaz G., Mucchi E., Rivola A., Rubini R., Troncossi M.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Rivola Alessandro; Dalpiaz Giorgio
Modelling dynamic behaviour and noise generation in gear pumps: Procedure and validation (Journal paper) Applied Acoustics, 2014. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E., Rivola A.) @article{Mucchi2014,
title = {Modelling dynamic behaviour and noise generation in gear pumps: Procedure and validation},
author = {Mucchi Emiliano; Rivola Alessandro; Dalpiaz Giorgio
},
url = {https://www.sciencedirect.com/science/article/pii/S0003682X13002491
},
doi = {10.1016/j.apacoust.2013.10.007},
year = {2014},
date = {2014-09-10},
journal = {Applied Acoustics},
keywords = {Dalpiaz G., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {article}
}
|
Carraro Enrico; Mucchi Emiliano; Dalpiaz Giorgio
Tuned Mass Damper Design for Vibration Suppression of Stacker Cranes (Conference) Settima giornata di studio Ettore Funaioli
, 2014. (Links | BibTeX | Tag: Carraro E., Dalpiaz G., Mucchi E.) @conference{Carraro2014,
title = {Tuned Mass Damper Design for Vibration Suppression of Stacker Cranes},
author = {Carraro Enrico; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/4064/
},
year = {2014},
date = {2014-09-10},
booktitle = {Settima giornata di studio Ettore Funaioli
},
keywords = {Carraro E., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2013
|
Mucchi Emiliano; Dalpiaz Giorgio
Numerical Vibro-Acoustic Analysis of Gear Pumps for Automotive Applications (Conference) Sesta giornata di studio Ettore Funaioli
, 2013. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Mucchi2013h,
title = {Numerical Vibro-Acoustic Analysis of Gear Pumps for Automotive Applications},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/3715/
},
year = {2013},
date = {2013-09-20},
booktitle = {Sesta giornata di studio Ettore Funaioli
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Dalpiaz Giorgio
Analysis of the Evolution of the Pressure Forces in Variable Displacement Vane Pumps Using Different Approaches (Conference) Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013
, 2013. (BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Mucchi2013e,
title = {Analysis of the Evolution of the Pressure Forces in Variable Displacement Vane Pumps Using Different Approaches},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2013},
date = {2013-09-19},
booktitle = {Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
D’Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio
On the time synchronous average in planetary gearboxes (Conference) Surveillance 7
, 2013. (BibTeX | Tag: D'Elia G., Dalpiaz G., Mucchi E.) @conference{Giorgio2013,
title = {On the time synchronous average in planetary gearboxes},
author = {D’Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2013},
date = {2013-09-19},
booktitle = {Surveillance 7
},
keywords = {D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Agazzi Alessandro; D’Elia Gianluca; Dalpiaz Giorgio
On the Wear and Lubrication Regime in Variable Displacement Vane Pumps (Journal paper) Wear, 2013. (Links | BibTeX | Tag: Agazzi A., D'Elia G., Dalpiaz G., Mucchi E.) @article{Mucchi2013b,
title = {On the Wear and Lubrication Regime in Variable Displacement Vane Pumps},
author = {Mucchi Emiliano; Agazzi Alessandro; D’Elia Gianluca; Dalpiaz Giorgio
},
url = {https://www.sciencedirect.com/science/article/pii/S0043164813004298
},
doi = {10.1016/j.wear.2013.06.025},
year = {2013},
date = {2013-09-10},
journal = {Wear},
keywords = {Agazzi A., D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Di Gregorio Raffaele; Dalpiaz Giorgio
Elastodynamic analysis of vibratory bowl feeders: Modeling and experimental validation (Journal paper) Mechanism and Machine Theory, 2013. (Links | BibTeX | Tag: Dalpiaz G., Di Gregorio R., Mucchi E.) @article{Mucchi2013c,
title = {Elastodynamic analysis of vibratory bowl feeders: Modeling and experimental validation},
author = {Mucchi Emiliano; Di Gregorio Raffaele; Dalpiaz Giorgio
},
url = {https://www.sciencedirect.com/science/article/pii/S0094114X12001929
},
doi = {10.1016/j.mechmachtheory.2012.09.009},
year = {2013},
date = {2013-09-06},
journal = {Mechanism and Machine Theory},
keywords = {Dalpiaz G., Di Gregorio R., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Dalpiaz Giorgio
An Assessed Model for the Vibro-Acoustic Analysis of Gear Pumps (Conference) Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013
, 2013. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Mucchi2013f,
title = {An Assessed Model for the Vibro-Acoustic Analysis of Gear Pumps},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
url = {Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013
},
year = {2013},
date = {2013-09-05},
booktitle = {Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Dalpiaz Giorgio
Experimental Validation of a Model for the Dynamic Analysis of Gear Pumps (Conference) Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013
, 2013. (BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Mucchi2013g,
title = {Experimental Validation of a Model for the Dynamic Analysis of Gear Pumps},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2013},
date = {2013-09-05},
booktitle = {Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Fiorati Stefano; Di Gregorio Raffaele; Dalpiaz Giorgio
Multibody modeling and vibration testing of 3R planar manipulators: effects of flexible installation frames (Journal paper) Robotica, 2013. (Links | BibTeX | Tag: Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.) @article{Mucchi2013,
title = {Multibody modeling and vibration testing of 3R planar manipulators: effects of flexible installation frames},
author = {Mucchi Emiliano; Fiorati Stefano; Di Gregorio Raffaele; Dalpiaz Giorgio
},
url = {https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S026357471300043X
},
doi = {10.1017/S026357471300043X},
year = {2013},
date = {2013-09-05},
journal = {Robotica},
keywords = {Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
2012
|
Mucchi Emiliano; D’Elia Gianluca; Dalpiaz Giorgio
Simulation of the running in process in external gear pumps and experimental verification (Journal paper) Meccanica, 2012. (Links | BibTeX | Tag: D'Elia G., Dalpiaz G., Mucchi E.) @article{Mucchi2012,
title = {Simulation of the running in process in external gear pumps and experimental verification},
author = {Mucchi Emiliano; D’Elia Gianluca; Dalpiaz Giorgio
},
url = {https://link.springer.com/article/10.1007/s11012-011-9470-9
},
doi = {10.1007/s11012-011-9470-9},
year = {2012},
date = {2012-09-12},
journal = {Meccanica},
keywords = {D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Dalpiaz Giorgio
Numerical Vibro-Acoustic Analysis of Gear Pumps for Automotive Applications (Conference) Proceedings of International conference on noise and Vibration Engineering - ISMA 2012
, 2012. (BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Giorgio2012b,
title = {Numerical Vibro-Acoustic Analysis of Gear Pumps for Automotive Applications},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2012},
date = {2012-09-06},
booktitle = {Proceedings of International conference on noise and Vibration Engineering - ISMA 2012
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Agazzi Alessandro; D'Elia Gianluca; Dalpiaz Giorgio
Assessment of the lubrication regime in variable displacement vane pumps (Conference) Quinta giornata di studio Ettore Funaioli
, 2012. (Links | BibTeX | Tag: Agazzi A., D'Elia G., Dalpiaz G., Mucchi E.) @conference{Giorgio2012,
title = {Assessment of the lubrication regime in variable displacement vane pumps},
author = {Mucchi Emiliano; Agazzi Alessandro; D'Elia Gianluca; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/3310/
},
year = {2012},
date = {2012-09-05},
booktitle = {Quinta giornata di studio Ettore Funaioli
},
keywords = {Agazzi A., D'Elia G., Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2011
|
Mucchi Emiliano; Fiorati Stefano; Di Gregorio Raffaele; Dalpiaz Giorgio
Determining the rigid-body inertia properties of cumbersome systems: comparison of techniques in time and frequency domain (Journal paper) Experimental Techniques, 2011. (Links | BibTeX | Tag: Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.) @article{Mucchi2011b,
title = {Determining the rigid-body inertia properties of cumbersome systems: comparison of techniques in time and frequency domain},
author = {Mucchi Emiliano; Fiorati Stefano; Di Gregorio Raffaele; Dalpiaz Giorgio
},
url = {https://onlinelibrary.wiley.com/doi/abs/10.1111/j.1747-1567.2009.00603.x
},
doi = {10.1111/j.1747-1567.2009.00603.x},
year = {2011},
date = {2011-09-16},
journal = {Experimental Techniques},
keywords = {Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Di Gregorio Raffaele; Dalpiaz Giorgio
Elastodynamic analysis of vibratory bowl feeders: modeling and experimental validation (Conference) Atti del XX Congresso AIMETA 2011
, 2011. (BibTeX | Tag: Dalpiaz G., Di Gregorio R., Mucchi E.) @conference{Giorgio2011,
title = {Elastodynamic analysis of vibratory bowl feeders: modeling and experimental validation},
author = {Mucchi Emiliano; Di Gregorio Raffaele; Dalpiaz Giorgio
},
year = {2011},
date = {2011-09-15},
booktitle = {Atti del XX Congresso AIMETA 2011
},
keywords = {Dalpiaz G., Di Gregorio R., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Fiorati Stefano; Mucchi Emiliano; Di Gregorio Raffaele; Dalpiaz Giorgio Experimental Validation and Updating of the Flexible Multibody Model of a Commercial 3R Planar Manipulator (Conference) Proceedings of the ASME 2011 International Design Engineering Technical Conference & Computer and Information in Engineering Conference IDETC/CIE 2011
, 2011. (BibTeX | Tag: Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.) @conference{Giorgio2011c,
title = {Experimental Validation and Updating of the Flexible Multibody Model of a Commercial 3R Planar Manipulator},
author = {Fiorati Stefano; Mucchi Emiliano; Di Gregorio Raffaele; Dalpiaz Giorgio},
year = {2011},
date = {2011-09-14},
booktitle = {Proceedings of the ASME 2011 International Design Engineering Technical Conference & Computer and Information in Engineering Conference IDETC/CIE 2011
},
keywords = {Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Dalpiaz Giorgio; Rivola Alessandro
Dynamic Behaviour of Gear Pumps: Effect of Variations in Operational and Design Parameters (Journal paper) Meccanica, 2011. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E., Rivola A.) @article{Mucchi2011,
title = {Dynamic Behaviour of Gear Pumps: Effect of Variations in Operational and Design Parameters},
author = {Mucchi Emiliano; Dalpiaz Giorgio; Rivola Alessandro
},
url = {https://link.springer.com/article/10.1007/s11012-010-9376-y
},
doi = {10.1007/s11012-010-9376-y},
year = {2011},
date = {2011-09-07},
journal = {Meccanica},
keywords = {Dalpiaz G., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {article}
}
|
Cavallari Marco; Montanari Alessio; Mucchi Emiliano; Dalpiaz Giorgio
Analysis of the evolution of the pressure forces in variable displacement vane pumps using different approaches (Conference) Quarta giornata di studio Ettore Funaioli
, 2011. (Links | BibTeX | Tag: Cavallari M., Dalpiaz G., Montanari A., Mucchi E.) @conference{Giorgio2011b,
title = {Analysis of the evolution of the pressure forces in variable displacement vane pumps using different approaches},
author = {Cavallari Marco; Montanari Alessio; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/3043/
},
year = {2011},
date = {2011-09-07},
booktitle = {Quarta giornata di studio Ettore Funaioli
},
keywords = {Cavallari M., Dalpiaz G., Montanari A., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2010
|
Mucchi Emiliano; Dalpiaz Giorgio; Rivola Alessandro
Elasto-dynamic analysis of a gear pump. Part II: meshing phenomena and simulation results (Journal paper) Mechanical Systems and Signal Processing, 2010. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E., Rivola A.) @article{Mucchi2010b,
title = {Elasto-dynamic analysis of a gear pump. Part II: meshing phenomena and simulation results},
author = {Mucchi Emiliano; Dalpiaz Giorgio; Rivola Alessandro
},
url = {https://www.sciencedirect.com/science/article/pii/S088832701000049X
},
doi = {10.1016/j.ymssp.2010.02.004},
year = {2010},
date = {2010-09-24},
journal = {Mechanical Systems and Signal Processing},
keywords = {Dalpiaz G., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {article}
}
|
Delvecchio Simone; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio
Advanced signal processing tools for the vibratory surveillance of assembly faults in diesel engine cold tests (Journal paper) Journal of Vibration and Acoustics, 2010. (Links | BibTeX | Tag: D'Elia G., Dalpiaz G., Delvecchio S., Mucchi E.) @article{Delvecchio2010,
title = {Advanced signal processing tools for the vibratory surveillance of assembly faults in diesel engine cold tests},
author = {Delvecchio Simone; D'Elia Gianluca; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://vibrationacoustics.asmedigitalcollection.asme.org/article.aspx?articleid=1471456
},
doi = {10.1115/1.4000807},
year = {2010},
date = {2010-09-22},
journal = {Journal of Vibration and Acoustics},
keywords = {D'Elia G., Dalpiaz G., Delvecchio S., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Tosi Gabriele; D’Ippolito Roberto; Dalpiaz Giorgio
A Robust Design Optimization Methodology for External Gear Pumps (Conference) ESDA 2010
, 2010. (BibTeX | Tag: D’Ippolito R., Dalpiaz G., Mucchi E., Tosi G.) @conference{Giorgio2010,
title = {A Robust Design Optimization Methodology for External Gear Pumps},
author = {Mucchi Emiliano; Tosi Gabriele; D’Ippolito Roberto; Dalpiaz Giorgio
},
year = {2010},
date = {2010-09-16},
booktitle = {ESDA 2010
},
journal = {ESDA 2010},
keywords = {D’Ippolito R., Dalpiaz G., Mucchi E., Tosi G.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso
Elasto-dynamic analysis of a gear pump. Part I: pressure distribution and gear eccentricity (Journal paper) Mechanical Systems and Signal Processing, 2010. (Links | BibTeX | Tag: Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.) @article{Mucchi2010c,
title = {Elasto-dynamic analysis of a gear pump. Part I: pressure distribution and gear eccentricity},
author = {Mucchi Emiliano; Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso
},
url = {https://www.sciencedirect.com/science/article/pii/S0888327010000488
},
doi = {10.1016/j.ymssp.2010.02.003},
year = {2010},
date = {2010-09-15},
journal = {Mechanical Systems and Signal Processing},
keywords = {Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.},
pubstate = {published},
tppubtype = {article}
}
|
Cavallari Marco; D’Elia Gianluca; Delvecchio Simone; Malagò Marco; Mucchi Emiliano; Dalpiaz Giorgio
Condition Monitoring by Means of Vibration Analysis Techniques: Some Case Studies (Conference) Terza giornata di studio Ettore Funaioli
, 2010. (Links | BibTeX | Tag: Cavallari M., D'Elia G., Dalpiaz G., Delvecchio S., Malago׳ M., Mucchi E.) @conference{Giorgio2010b,
title = {Condition Monitoring by Means of Vibration Analysis Techniques: Some Case Studies},
author = {Cavallari Marco; D’Elia Gianluca; Delvecchio Simone; Malagò Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/2771/
},
year = {2010},
date = {2010-09-03},
booktitle = {Terza giornata di studio Ettore Funaioli
},
keywords = {Cavallari M., D'Elia G., Dalpiaz G., Delvecchio S., Malago׳ M., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2009
|
Dalpiaz Giorgio; Pompoli Francesco; Mucchi Emiliano
Ricerca industriale sul comportamento vibro-acustico di pompe ad ingranaggi (Journal paper) Ingegneria dell'Autoveicolo, 2009. (BibTeX | Tag: Dalpiaz G., Mucchi E., Pompoli F.) @article{Dalpiaz2009,
title = {Ricerca industriale sul comportamento vibro-acustico di pompe ad ingranaggi},
author = {Dalpiaz Giorgio; Pompoli Francesco; Mucchi Emiliano
},
year = {2009},
date = {2009-09-24},
journal = {Ingegneria dell'Autoveicolo},
keywords = {Dalpiaz G., Mucchi E., Pompoli F.},
pubstate = {published},
tppubtype = {article}
}
|
Mucchi Emiliano; Fiorati Stefano; Di Gregorio Raffaele; Dalpiaz Giorgio
Determining the rigid-body inertia properties of cumbersome systems: comparison of techniques in time and frequency domain (Conference) IMAC2009
, 2009. (BibTeX | Tag: Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.) @conference{Giorgio2009b,
title = {Determining the rigid-body inertia properties of cumbersome systems: comparison of techniques in time and frequency domain},
author = {Mucchi Emiliano; Fiorati Stefano; Di Gregorio Raffaele; Dalpiaz Giorgio
},
year = {2009},
date = {2009-09-17},
booktitle = {IMAC2009
},
keywords = {Dalpiaz G., Di Gregorio R., Fiorati S., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Cavallari Marco; D'Elia Gianluca; Delvecchio Simone; Malagò Marco; Mucchi Emiliano; Dalpiaz Giorgio
On the use of vibration signal analysis for industrial quality control (Conference) Atti del XIX Congresso Aimeta 2009
, 2009. (Links | BibTeX | Tag: Cavallari M., D'Elia G., Dalpiaz G., Delvecchio S., Malago׳ M., Mucchi E.) @conference{Giorgio2009,
title = {On the use of vibration signal analysis for industrial quality control},
author = {Cavallari Marco; D'Elia Gianluca; Delvecchio Simone; Malagò Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://www.dipmat.univpm.it/aimeta2009/
},
year = {2009},
date = {2009-09-10},
booktitle = {Atti del XIX Congresso Aimeta 2009
},
keywords = {Cavallari M., D'Elia G., Dalpiaz G., Delvecchio S., Malago׳ M., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Malagò Marco; Mucchi Emiliano; Dalpiaz Giorgio
Condition monitoring and diagnostics in heavy-duty wheels: a first experimental approach (Conference) Proceedings of the ASME, 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference
, 2009. (BibTeX | Tag: Dalpiaz G., Malago׳ M., Mucchi E.) @conference{Giorgio2009c,
title = {Condition monitoring and diagnostics in heavy-duty wheels: a first experimental approach},
author = {Malagò Marco; Mucchi Emiliano; Dalpiaz Giorgio
},
year = {2009},
date = {2009-09-10},
booktitle = {Proceedings of the ASME, 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference
},
keywords = {Dalpiaz G., Malago׳ M., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2008
|
Mucchi Emiliano; Dalpiaz Giorgio
Simulation of gear pump dynamic behaviour by an integrated LP/FE model (Conference) Seconda giornata di studio Ettore Funaioli
, 2008. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Giorgio2008,
title = {Simulation of gear pump dynamic behaviour by an integrated LP/FE model},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/2552/
},
year = {2008},
date = {2008-09-18},
booktitle = {Seconda giornata di studio Ettore Funaioli
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2007
|
Mucchi Emiliano; Dalpiaz Giorgio; Pizzotti Simone
Updating an elastodynamic model of gear pumps to helical gear prototypes (Conference) ICSV14
, 2007. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E., Pizzotti S.) @conference{Simone2007,
title = {Updating an elastodynamic model of gear pumps to helical gear prototypes},
author = {Mucchi Emiliano; Dalpiaz Giorgio; Pizzotti Simone
},
url = {https://www.acoustics.asn.au/conference_proceedings/ICSV14/index.htm
},
year = {2007},
date = {2007-09-14},
booktitle = {ICSV14
},
keywords = {Dalpiaz G., Mucchi E., Pizzotti S.},
pubstate = {published},
tppubtype = {conference}
}
|
Dalpiaz Giorgio; Mucchi Emiliano; Mischiari Stefano
Experimental evaluation of modal damping of automotive components in different boundary conditions (Conference) ICSV14
, 2007. (Links | BibTeX | Tag: Dalpiaz G., Mischiari S., Mucchi E.) @conference{Stefano2007,
title = {Experimental evaluation of modal damping of automotive components in different boundary conditions},
author = {Dalpiaz Giorgio; Mucchi Emiliano; Mischiari Stefano
},
url = {https://www.acoustics.asn.au/conference_proceedings/ICSV14/index.htm
},
year = {2007},
date = {2007-09-06},
booktitle = {ICSV14
},
keywords = {Dalpiaz G., Mischiari S., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Delvecchio Simone; Dalpiaz Giorgio; Mucchi Emiliano
Condition monitoring of marine couplings through vibration analysis techniques (Conference) Proceedings of the WCEAM CM 2007
, 2007. (BibTeX | Tag: Dalpiaz G., Delvecchio S., Mucchi E.) @conference{Emiliano2007,
title = {Condition monitoring of marine couplings through vibration analysis techniques},
author = {Delvecchio Simone; Dalpiaz Giorgio; Mucchi Emiliano
},
year = {2007},
date = {2007-09-06},
booktitle = {Proceedings of the WCEAM CM 2007
},
keywords = {Dalpiaz G., Delvecchio S., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Moreno David; Mucchi Emiliano; Dalpiaz Giorgio; Rivola Alessandro
Multibody analysis of the desmodromic valve train of the Ducati MotoGP engine (Conference) Proceedings of the Multibody dynamics 2007 ECCOMAS Thematic Conference
, 2007. (BibTeX | Tag: Dalpiaz G., Moreno D., Mucchi E., Rivola A.) @conference{Alessandro2007b,
title = {Multibody analysis of the desmodromic valve train of the Ducati MotoGP engine},
author = {Moreno David; Mucchi Emiliano; Dalpiaz Giorgio; Rivola Alessandro
},
year = {2007},
date = {2007-09-06},
booktitle = {Proceedings of the Multibody dynamics 2007 ECCOMAS Thematic Conference
},
keywords = {Dalpiaz G., Moreno D., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Venturi Valerio; Dalpiaz Giorgio
A hybrid LP/FE model for the dynamic analysis of external gear pump (Conference) Proceedings of the International Mechanical Engineering Congress & Expositions IMECE2007
, 2007. (BibTeX | Tag: Dalpiaz G., Mucchi E., Venturi V.) @conference{Giorgio2007,
title = {A hybrid LP/FE model for the dynamic analysis of external gear pump},
author = {Mucchi Emiliano; Venturi Valerio; Dalpiaz Giorgio
},
year = {2007},
date = {2007-09-06},
booktitle = {Proceedings of the International Mechanical Engineering Congress & Expositions IMECE2007
},
keywords = {Dalpiaz G., Mucchi E., Venturi V.},
pubstate = {published},
tppubtype = {conference}
}
|
Mucchi Emiliano; Dalpiaz Giorgio
Problemi Metodologici Nella Modellazione Multibody Con Corpi Flessibili (Conference) Giornata di studio in onore di Ettore Funaioli
, 2007. (Links | BibTeX | Tag: Dalpiaz G., Mucchi E.) @conference{Mucchi2007,
title = {Problemi Metodologici Nella Modellazione Multibody Con Corpi Flessibili},
author = {Mucchi Emiliano; Dalpiaz Giorgio
},
url = {http://amsacta.unibo.it/2460/
},
year = {2007},
date = {2007-09-04},
booktitle = {Giornata di studio in onore di Ettore Funaioli
},
keywords = {Dalpiaz G., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2006
|
Dalpiaz Giorgio; D'Elia Gianluca; Mucchi Emiliano; Rivola Alessandro
Vibro-acoustic measurements for the identification of incoming stall in axial compressors (Conference) ISMA2006
, 2006. (Links | BibTeX | Tag: D'Elia G., Dalpiaz G., Mucchi E., Rivola A.) @conference{Alessandro2006,
title = {Vibro-acoustic measurements for the identification of incoming stall in axial compressors},
author = {Dalpiaz Giorgio; D'Elia Gianluca; Mucchi Emiliano; Rivola Alessandro
},
url = {http://past.isma-isaac.be/isma2006/
},
year = {2006},
date = {2006-09-07},
booktitle = {ISMA2006
},
keywords = {D'Elia G., Dalpiaz G., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {conference}
}
|
Dalpiaz Giorgio; D'Elia Gianluca; Mucchi Emiliano; Fernàndez del Rincòn Alfonso
Modeling run in process in external gear pumps (Conference) ESDA06
, 2006. (BibTeX | Tag: D'Elia G., Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.) @conference{delAlfonso2006b,
title = {Modeling run in process in external gear pumps},
author = {Dalpiaz Giorgio; D'Elia Gianluca; Mucchi Emiliano; Fernàndez del Rincòn Alfonso
},
year = {2006},
date = {2006-09-07},
booktitle = {ESDA06
},
keywords = {D'Elia G., Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
Dalpiaz Giorgio; Mucchi Emiliano; D'Elia Gianluca; Fernàndez del Rincòn Alfonso
Pressure phenomena in dynamic analysis of external gear pumps (Conference) ISMA2006
, 2006. (Links | BibTeX | Tag: D'Elia G., Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.) @conference{delAlfonso2006,
title = {Pressure phenomena in dynamic analysis of external gear pumps},
author = {Dalpiaz Giorgio; Mucchi Emiliano; D'Elia Gianluca; Fernàndez del Rincòn Alfonso
},
url = {http://past.isma-isaac.be/isma2006/
},
year = {2006},
date = {2006-09-06},
booktitle = {ISMA2006
},
keywords = {D'Elia G., Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|
2005
|
Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso; Mucchi Emiliano; Rivola Alessandro
Experimental validation of a model for the dynamic analysis of gear pumps (Conference) NOVEM
, 2005. (BibTeX | Tag: Dalpiaz G., Fernàndez del Rincòn A., Mucchi E., Rivola A.) @conference{delAlessandro2005,
title = {Experimental validation of a model for the dynamic analysis of gear pumps},
author = {Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso; Mucchi Emiliano; Rivola Alessandro
},
year = {2005},
date = {2005-09-10},
booktitle = {NOVEM
},
keywords = {Dalpiaz G., Fernàndez del Rincòn A., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {conference}
}
|
2004
|
Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso; Mucchi Emiliano; Rivola Alessandro
Model-based analysis of dynamic phenomena in gear pumps (Conference) Surveillance 5
, 2004. (BibTeX | Tag: Dalpiaz G., Fernàndez del Rincòn A., Mucchi E., Rivola A.) @conference{delAlessandro2004,
title = {Model-based analysis of dynamic phenomena in gear pumps},
author = {Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso; Mucchi Emiliano; Rivola Alessandro
},
year = {2004},
date = {2004-09-09},
booktitle = {Surveillance 5
},
keywords = {Dalpiaz G., Fernàndez del Rincòn A., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {conference}
}
|
Benni Gabriele; Rivola Alessandro; Dalpiaz Giorgio; Mucchi Emiliano
A non linear model of the geartrain of the timing system of the Ducati Racing Motorbike (Conference) Surveillance 5
, 2004. (BibTeX | Tag: Benni G., Dalpiaz G., Mucchi E., Rivola A.) @conference{Emiliano2004,
title = {A non linear model of the geartrain of the timing system of the Ducati Racing Motorbike},
author = {Benni Gabriele; Rivola Alessandro; Dalpiaz Giorgio; Mucchi Emiliano
},
year = {2004},
date = {2004-09-09},
booktitle = {Surveillance 5
},
keywords = {Benni G., Dalpiaz G., Mucchi E., Rivola A.},
pubstate = {published},
tppubtype = {conference}
}
|
Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso; Mucchi Emiliano
Modeling Meshing Phenomena in Gear Pumps (Conference) ISMA2004
, 2004. (Links | BibTeX | Tag: Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.) @conference{delEmiliano2004,
title = {Modeling Meshing Phenomena in Gear Pumps},
author = {Dalpiaz Giorgio; Fernàndez del Rincòn Alfonso; Mucchi Emiliano
},
url = {http://past.isma-isaac.be/isma2004/
},
year = {2004},
date = {2004-09-08},
booktitle = {ISMA2004
},
keywords = {Dalpiaz G., Fernàndez del Rincòn A., Mucchi E.},
pubstate = {published},
tppubtype = {conference}
}
|